Tint when you want it.
Clarity when you need it.
ZeroTint is an electronically adjustable automotive tint system developed from years of hands-on tint-shop experience. Move compatible glass between a darker privacy state and a clearer visibility state using an integrated electronic control system.
- Workshop developed
- Vehicle compatibility support
- Secure checkout
- Warranty-backed
- Installation guidance included
Rated 4.7 by 6 verified ZeroTint customers.
Traditional tint makes
one decision permanent.
Fixed tint can improve privacy and appearance, but the same shade remains in place during bright afternoons, dark roads, poor weather, parking garages, and every condition in between. ZeroTint was created to introduce a more adaptable approach.
Permanent Shade
Traditional film stays at one opacity regardless of the driving environment.
Compromise
Drivers often have to choose between stronger privacy and greater nighttime visibility.
No Control
Once installed, standard tint cannot adapt without being removed and replaced.
ZeroTint gives the glass an adjustable state.Change between supported transparency modes, subject to safe and lawful use.
Advanced technology. Straightforward control.
Four elements move state through the system: your input, the controller, the vehicle power connection, and the smart tint layer bonded to compatible glass.
- Step 01
Select a State
Use the included control interface to choose between the supported transparency modes.
- Step 02
The Film Responds
The smart tint layer changes its optical state using the connected electronic control system.
- Step 03
The Glass Adapts
Move between a darker privacy-focused appearance and a clearer state when desired.
- Step 04
Return Anytime
Switch the system again whenever your driving situation changes, subject to safe and lawful use.
Simplified representation. Actual construction may vary by application and specification.
Designed like an automotive component, not a novelty accessory.
ZeroTint combines optical material, electronic control, vehicle integration, and installation support into one complete system. Every configuration should be selected with the vehicle, glass shape, electrical requirements, and installation method in mind.
Adjustable Privacy
Change between supported tint states without replacing the film.
Clearer Low-Light Option
Return to the clearer supported state when additional visibility is desired.
Integrated Control System
A purpose-built controller manages the transition between states.
Workshop-Informed Design
Developed around the installation and usability problems our tint technicians encountered firsthand.
Vehicle-Focused Configuration
Compatibility is reviewed using vehicle and glass information before fulfillment where required.
Technical Support
Receive pre-purchase guidance, installation resources, and post-purchase assistance.
Born in a tint bay. Refined for drivers everywhere.
Before ZeroTint became an online automotive technology brand, our work happened one vehicle at a time. We prepared glass, installed fixed films, corrected failed installations, and helped drivers balance privacy, appearance, heat, and visibility. Those years of practical experience shaped every part of the ZeroTint system.
- 2014
Local tint operation established
Doors open in a working automotive tint bay.
- 2017
12,000+ vehicle installations completed
Thousands of windows prepared, installed, and corrected.
- 2019
Adjustable tint research and testing begins
Bench work on electronic optical materials and vehicle integration.
- 2022
First complete ZeroTint system developed
A purpose-built controller, film, and wiring architecture.
- 2024
Nationwide online ordering launches
Vehicle compatibility support extended to drivers everywhere.
"We did not enter automotive tint because adjustable glass looked futuristic. We built ZeroTint because fixed film kept forcing customers to compromise."
Two different automotive approaches.
Traditional tint remains a strong choice for customers who want a simple permanent shade. ZeroTint is designed for drivers who value greater control and are comfortable with a more advanced installed system.
Everything works as one complete system.
Configurations may vary by vehicle. Exact contents are confirmed after compatibility review.
- 1
Adjustable tint material
The optical layer bonded to compatible vehicle glass.
- 2
Electronic controller
Manages state transitions and power delivery.
- 3
Vehicle power connection
Integrates with the vehicle's electrical system.
- 4
Activation control
Physical or interface control for state selection.
- 5
Wiring harness
Purpose-fit cabling for the ZeroTint system.
- 6
Edge and connection materials
Trim and sealing to keep the install clean.
- 7
Installation accessories
Prep tools and application materials.
- 8
Setup and care guide
Configuration, care, and maintenance instructions.
- 9
Technical support access
Human support for compatibility and installation.
- · [INCLUDED COMPONENT 1]
- · [INCLUDED COMPONENT 2]
- · [INCLUDED COMPONENT 3]
- · [OPTIONAL COMPONENT]
- · [VEHICLE-SPECIFIC COMPONENT]
Built around your vehicle.
Start with your year, make, and model. Compatibility is not assumed — selected applications may require review before production or shipment.
Full vehicle coverage included. Every package is built as a complete compatible set — no zone upgrades required.
Not offered by default. Regulatory, safety, and technical reasons apply.
Advanced DIY only. No professional installation is offered.
Pick individual windows or a full-vehicle bundle.
Mix and match variants — every window ships the same ZeroTint system. Sale prices apply automatically.
Every option ships with controller, harness, and DIY install guide. Summer Sale · 30% off applied at cart.
Configure my systemAdvanced DIY only.
ZeroTint ships as an advanced DIY system. It is designed for experienced automotive DIY customers and shop-based installers who are comfortable with trim removal, electrical routing, and precision film work. We do not offer or coordinate professional installation.
Advanced DIY Installation
Requirements vary by vehicle. Review the full installation guide before ordering.
- Estimated difficulty: Advanced
- Estimated time: 6–10 hours per vehicle
- Electrical work required: Yes (12V switched power)
- Trim removal required: Yes (door cards and B-pillar trim)
- Special tools required: Heat gun, plastic trim tools, panel prep kit
- Prior automotive film experience recommended
Installation requirements vary by vehicle. Incorrect installation may damage the product, glass, trim, or vehicle electrical system.
Documented performance. Transparent specifications.
Values are confirmed against the shipped product configuration. Placeholder values are shown until final specifications are published.
| Dark State VLT | 3% VLT |
| Clear State VLT | 68% VLT |
| Switching Time | Under 1.2 seconds |
| Operating Voltage | 12V DC (vehicle power) |
| Maximum Power Draw | 4.8 W per window (active switching) |
| Standby Power Draw | 0.15 W per window |
| Operating Temperature | −22°F to 176°F (−30°C to 80°C) |
| UV Rejection | 99.9% |
| Total Solar Energy Rejection | 62% |
| Material Thickness | 0.42 mm laminated |
| Control Method | In-cabin controller and Bluetooth LE app |
| Expected Cycle Rating | 100,000+ switching cycles |
| Warranty | 3-year |
Certifications (CE, FCC, RoHS, DOT, SAE, etc.) are displayed only when supporting documentation is on file.
Control for the moments that change.
Always prioritize visibility, safe driving, and local regulations. ZeroTint does not encourage changing tint states while actively driving unless safe operation has been verified for the configuration.
Parked Privacy
Use the darker supported state when the vehicle is parked and additional privacy is desired, subject to local law.
Bright Daylight
Adjust the system based on the supported product settings and driving conditions.
Low-Light Conditions
Return to the clearer supported state when increased visibility is appropriate.
Vehicle Shows and Events
Transform the vehicle's appearance without permanently committing to a fixed shade.
Passenger Comfort
Give occupants a more adaptable cabin environment.
Premium Builds
Integrate adjustable glass into a larger custom automotive interior or exterior build.
Verified customer feedback.
Rated 4.7 out of 5 by verified DIY installers. Real customer experiences with the ZeroTint system.
Finally, tint that actually does something
This tint is wild. Cruising in the day I can drop it dark as hell, then clear it up instantly when I need to see at night. No more picking a permanent VLT and regretting it.
Looks menacing parked, clear when I drive
I run it near black when the car is sitting so it looks the part. Hit the switch and the windshield is basically clear glass for late-night pulls. The transition is fast enough to feel like a cheat code.
Tint game changer for a daily driver
I wanted that slammed, dark tint look but I daily the car. ZeroTint lets me have 5% aesthetics during the day and still see out at night. Best of both worlds, no compromise.
Like having two tints in one
The range is impressive. I can make the cabin nearly opaque for photos and shows, then dial it back to factory-clear for the drive home. People ask how I swap tints so fast.
Dark when I want it, legal when I need it
Track day I can run it dark for the look. On the street I clear it up before I roll up to any checkpoint. The control is right there on the dash, no apps, no lag.
Premium tint with real adjustability
Optics are clean, no haze or rainbow effect. The real win is the adjustment. I can make it aggressive for a shoot and transparent for backroad runs at night. Worth the install effort.
Verified where it matters.
Genuine press mentions and installer partners will be added here as they are established. We do not display fake logos or unverified endorsements.
Developed by automotive tint professionals
Tested across multiple vehicle platforms
Technical support based in the United States
Secure encrypted checkout
Documented warranty process
Replacement components available
Advanced technology should come with straightforward support.
Every ZeroTint system is covered by our limited 3-year warranty against qualifying manufacturing defects. Our warranty page explains exactly what is covered, what is excluded, and how to request support.
Qualifying manufacturing defects during the limited warranty period.
Installation performed in accordance with the ZeroTint installation guide. Professional installation may be required to preserve coverage.
Submit an order number, photos or video, and a short problem description via the warranty claims form. Expected response within [RESPONSE TIME].
Clear timelines. Confirmed after review.
Because ZeroTint systems may require vehicle or application review, orders are not treated like generic shelf products. Estimated preparation and delivery timelines are displayed before checkout and confirmed after compatibility review.
- Step 01Order received
Configuration and payment confirmed.
- Step 02Vehicle details reviewed
Compatibility check by our support team.
- Step 03System configured
Components paired to your application.
- Step 04Quality check completed
Bench validation of the assembled system.
- Step 05Order shipped
Tracking and signature requirements delivered.
- Step 06Installation resources delivered
Digital resources sent to your account.
Practical answers, not marketing.
If your question is not covered here, our support team can help with compatibility, installation, warranty, and ordering.
Give your glass another setting.
Select your vehicle, review compatibility, and configure the ZeroTint system built for your application.